Hydrometer temperature correction calculator
A hydrometer only reads true at one temperature, usually 20°C. Took your reading from warm wort, or a cold sample? Enter the reading and the sample’s temperature, and see what the gravity really is.
How it works
Liquid gets thinner as it warms up, so a hydrometer sinks a little deeper in a warm sample and reads low. In a cold sample it floats higher and reads high. Each hydrometer is made to read true at one temperature, printed on it or its packet: usually 20°C, sometimes 15.6°C (60°F) on older or American ones.
The calculator uses the correction most homebrewers use, worked out from how the density of water changes with temperature, to turn your reading into what it would have been at your hydrometer’s temperature.
Near room temperature the difference is small, but it grows the hotter the sample: at 30°C a reading is about 3 points (0.003) low, at 40°C about 6. Above about 40°C the correction gets less dependable, so it’s best to cool the sample first.
An example
On brew day it’s tempting to read the gravity before the wort has properly cooled. Say it reads 1.050 at 30°C on a hydrometer calibrated to 20°C: the true original gravity is about 1.053, and an ABV worked out from 1.050 would come out about 0.3% low.
Cold works the other way. A sample of finished beer straight from a cold crash at 4°C that reads 1.012 is really about 1.010.
Questions
- What temperature is my hydrometer calibrated to?
- It’s printed on the hydrometer itself, often on the paper scale inside it, or on its packet. Most are 20°C; some older or American ones are 15.6°C (60°F).
- Should I just cool the sample instead?
- If you can, yes. A sample near the calibration temperature needs little or no correcting, and the correction gets less reliable above about 40°C. Pour the sample into the trial jar and let it stand, or stand the jar in cold water.
- How much difference does it make?
- Near room temperature, very little: a point or two. But take your original gravity from hot wort and it can be five points out or more, which puts your ABV out by over half a percent.
- Does it work for a refractometer?
- No, this is for hydrometers. Most refractometers correct for temperature themselves, and they need a different correction once fermentation has started, as alcohol throws their reading off.
More tools
ABV calculator
Work out a homebrew’s ABV, attenuation and calories from hydrometer readings, including fruit or sugar added during fermentation.
Open the ABV calculatorCarbonation calculator
How much priming sugar, or how many carbonation drops, to put in each bottle for the fizz you want: for 330ml, 500ml and 750ml bottles.
Open the carbonation calculatorBottle calculator
How many bottles a homebrew batch will fill, in 330ml, 500ml, 750ml or any size, after the sediment, with spares to sanitise in case.
Open the bottle calculatorWater calculator
Mash and sparge water for an all-grain brew day, from your grain bill, batch size and kettle’s boil-off, with a warning before the kettle overflows.
Open the water calculatorIBU calculator
Estimate how bitter a homebrew will be, in IBU, from the hops you boil, the alpha acid on each packet and how long each one boils.
Open the IBU calculatorRecipe scaler
Scale a homebrew recipe or kit to the batch size you want: grain, hops, sugar and fruit, from a big kit down to a demijohn or up to a bigger brew.
Open the recipe scalerDilution calculator
How much water to add to bring your wort or beer down to a gravity, or what the gravity will be once you top it up with water.
Open the dilution calculator