Sauvignon Plonk, Sauvignon Blanc

We started with a wine: a six-bottle Beaverdale Sauvignon Blanc kit, to learn the process before risking 23 litres of beer.

Method
Wine kit
Status
All gone
Started
Bottled
Ready

The numbers

Original gravity
1.078
Final gravity
0.990
ABV
11.6%
Batch size
4.5L
Per 100ml, estimated
69kcal
Per 750ml bottle, estimated
518kcal

ABV comes from our hydrometer readings. Calories are worked out from the gravities. Anything marked estimated is a calculation rather than a measurement.

Brew day

A glass of pale golden Sauvignon Plonk beside its bottle, sealed with a white screw cap, on a kitchen worktop in the evening
Our very first brew, 2025

I know, I know: if the plan is to brew beer, why start with a white wine? Honestly, I was intimidated. I didn’t want to wreck 23 litres of beer on my first attempt, and in The Homebrew Shop I spotted a nifty little six-bottle Sauvignon Blanc kit from Beaverdale. My wife is a massive Sauvignon Blanc fan, so it seemed a good way to test the whole process without risking a big batch of beer. It would also give me something to bribe her with when she started complaining about buckets of fermenting beer everywhere later!

The process

Looking down into a white plastic fermenting bucket with a tap, full of the wine, a cloudy golden brown, on a kitchen worktop
In the fermenter, 2025

There isn’t much to tell: it’s a basic beginners’ kit. The grape concentrate went into the fermenter, topped up to 4.6 litres with water, then the bentonite and the yeast, at 1.078 to start. By the 20th it read 0.990, below the kit’s 0.996 target, and it was still 0.990 the next day, so I started clearing it: degassing, the stabiliser and two rounds of finings. A week later it was transferred off the sediment to polish for another week, and on 5 October it went into six 750ml screw-top bottles.

Follow a good sanitising routine and the steps carefully, and you should end up with a drinkable wine at the end. The hardest part is waiting.

  • A glass demijohn of golden wine with a bubbler airlock in its bung, clearing in the garage beside empty demijohns and a white fermenting bucket
    Clearing in the demijohn, 2025
  • Darren’s wife peeking out excitedly from behind five bottles of Sauvignon Plonk on the kitchen worktop
    My wife, eager to try it, 2025

From start to bottle (22 days)

  1. 1.078Brew day, 13 September 2025
  2. 0.990Day 7, 20 September 2025: fermentation looked finished
  3. 0.990Day 8, 21 September 2025: steady; clearing started
  • Bottled: day 22
  • Ready: day 83

Recipe

Kit: Beaverdale Sauvignon Blanc 6-bottle wine kit

Ingredients for 4.5 litres
IngredientAmountWhen
Wine yeast (from the kit)1 sachetPitched
Grape juice concentrate1 bagFermenter, topped up to 4.6 litres with water
Bentonite1 sachetBefore the yeast
Stabiliser1 sachetClearing
Kieselsol finings1 sachetClearing
Chitosan finings1 sachetClearing, 24 hours later
Fermentation
Fermenting for 8 days, then clearing for 7 days, then polishing for 7 days
Bottles
6 × 750ml

Tasting notes

  1. First tastingA perfectly drinkable Sauvignon Blanc. It’s not going to win any awards, but the six bottles disappeared very quickly. In Jaws they needed a bigger boat; in our house we just need a bigger batch!

What we’d change

Be patient, and give it the full six months to mature in the bottle. That’s always going to be very hard for us!

Brew it again?
Yes
Our rating
Fisher & Forbes Brewing Co, home