I Am Your Guava, Fruit Flavour Pale Ale
A guava pale ale from Muntons’ limited Tap Room series: a straightforward kit brew, made with a little help from my nine-year-old son.
- Method
- Extract kit
- Status
- All gone
- Started
- Bottled
- Ready
The numbers
- Original gravity
- 1.036
- Final gravity
- 1.004
- ABV
- 4.2%
- Attenuation
- 89%
- Batch size
- 21L
- Per 100ml, estimated
- 33kcal
- Per 330ml bottle, estimated
- 107kcal
ABV and attenuation come from our hydrometer readings. Calories are worked out from the gravities. Anything marked estimated is a calculation rather than a measurement.
Brew day

A straightforward brew, and everything went to plan. I Am Your Guava is a guava-flavoured pale ale from Muntons’ Tap Room series of limited-edition kits, so we’d happily brew it again, but there’s a good chance we won’t be able to buy it.
Brewing with my son
My nine-year-old son wanted to help, so I walked him through every step. We stood the can of malt extract in hot water to soften it, poured it into the sterilised fermenter, and used boiling water to rinse out the last of the extract. Then in went a kilo of light spraymalt, stirred until it dissolved. Topped up to 21 litres with cold water, it read 1.036, and the yeast went on top.
Fermentation

The hop sachet went in on 20 November, four days in. It was down to 1.004 by the 30th and still there on 7 December, so we bottled it that day: sixty-two 330ml swing-top bottles, with a carbonation drop in each. My son helped with that too.
More photos

Yeast pitched on to the wort, 2025 
The yeast going to work, 2025 
Fermenting, 2025 
Bottling, 2025 
Off the bottle tree, 2025
From start to bottle (21 days)
- 1.036Brew day, 16 November 2025
- 1.004Day 14, 30 November 2025: fermentation finished
- 1.004Day 21, 7 December 2025: steady; bottled
- Bottled: day 21
- Ready: day 42
Recipe
Kit: Muntons Tap Room I Am Your Guava
| Ingredient | Amount | When |
|---|---|---|
| Muntons Light Spraymalt | 1kg | Fermenter |
| Kit ale yeast | 1 sachet | Pitched |
| Kit can of hopped malt extract | 1 can | Fermenter, dissolved in 2.5 litres of boiling water, topped up to 21 litres |
| Kit hop sachet | 1 sachet | Dry hop, 20 November (day 4) |
- Fermentation
- Fermenting for 21 days
- Priming
- Carbonation drops, 1 per bottle
- Bottles
- 62 × 330ml
Tasting notes
- First pintsVery refreshing and enjoyable. The guava really comes through, if a little artificial. The carbonation is quite light, which suits a pale ale, but it would benefit from a touch more.
What we’d change
Nothing much: it was an enjoyable brew. Bottling in 500ml bottles with two carbonation drops each might have given it the right level of fizz.
- Brew it again?
- Yes
- Our rating
Kit used
- Demijohn corks
- Plastic brewing spoon, Alan’s
- Food bag clips
- 5L jug
- Thermostatic heat belt
- Fermentation buckets, Alan’s
- Bubbler airlocks, Alan’s
- Large auto siphon (56cm)
- Tubing, Alan’s
- Plastic bottling bucket
- Stick-on fermentation thermometers
- Hydrometers, Alan’s
- Bottling wand, Alan’s
- 330ml swing-top bottles
- VWP cleanser
- Chemsan
- Spray bottles
- Sponge scourers
- Bottle brush, Alan’s
- Bottle rinser
- Bottle tree